| 1 | Tractor track cultivation zone. Perfect cultivation of the tracks eliminates uneven emergence of plants after sowing. |
| 2 | Basic soil levelling zone. A precisely leveled soil surface allows the seedbed to be evenly cultivated. |
| 3 | Cultivation zone. The soil is cultivated with share section to the set depth. The depth should be the same as the future sowing depth. Arrow shares allow full-area undercut and weeds control. |
| 4 | Wave-levelling zone behind a share cultivation section. |
| 5 | Final soil levelling zone. The rear harrow ensures a perfect leveled surface with minimum clods for subsequent sowing. |
Cultivator Verso is especially suitable for pre-sowing preparation of the soil after ploughing or stubble-breaking – levelling of the surface and preparation of the sowing bed.
Verso is a half mounted 5-row cultivator with low traction resistance and variable processing depth from 0 to 10 cm. Flexible narrow chisels of the width of 37 mm ensure intensive and fine soil processing. The chisels are flexibly fixed to the frame in the distance of 57 cm with the possibility of deflection in case of an impact on an obstacle.
Cultivator Verso is especially suitable for pre-sowing preparation of the soil after ploughing or stubble-breaking – levelling of the surface and preparation of the sowing bed.
Verso is a half mounted 5-row cultivator with low traction resistance and variable processing depth from 0 to 10 cm. Flexible narrow chisels of the width of 37 mm ensure intensive and fine soil processing. The chisels are flexibly fixed to the frame in the distance of 57 cm with the possibility of deflection in case of an impact on an obstacle.
The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.
Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.
| Technical parameters | Units | Verso 6 PS | Verso 7 PS | Verso 8 PS | Verso 9 PS |
|---|---|---|---|---|---|
| Working width | mm | 6 000 | 7 000 | 8 000 | 9 000 |
| Transport width | mm | 3 000 | 3 000 | 3 000 | 3 000 |
| Transport height | mm | 3 160 | 3 720 | 4 000 | 4 580 |
| Total machine length | mm | 6 800 | 6 800 | 6 800 | 6 800 |
| Working depth | mm | 0─100 | 0─100 | 0─100 | 0─100 |
| Number of tines (+track cultivators) | pcs | 77 (+8) | 91 (+8) | 101 (+8) | 115 (+8) |
| Tine spacing | mm | 75 | 75 | 75 | 75 |
| Number of tine rows | pcs | 5 | 5 | 5 | 5 |
| Row spacing | mm | 580 | 580 | 580 | 580 |
| Release force of tines | kg | variable | variable | variable | variable |
| Frame clearance | mm | 430 | 430 | 430 | 430 |
| Working performance | ha/h | 8─10 | 9─11 | 10─12 | 11─13 |
| Towing vehicle 1 | kW HP |
130─195 180─270 |
150─225 205─308 |
160─240 220─330 |
180─270 245─368 |
| Working speed | km/h | 8─15 | 8─15 | 8─15 | 8─15 |
| Maximum transport speed 2 | km/h | 25 | 25 | 25 | 25 |
| Maximum slope availability | ° | 6 | 6 | 6 | 6 |
| Number of hydraulic circuits / pressure | bar | 4 / 200 | 4 / 200 | 4 / 200 | 4 / 200 |
| Number of quick-coupling devices / type | 8 / ISO 12,5 | 8 / ISO 12,5 | 8 / ISO 12,5 | 8 / ISO 12,5 | |
| Tractor hitch requirement | TPH cat. 2 and 3; lower hitch K80; eye Ø 40, 50, 70 mm | ||||
| Machine weight | kg | 3 570 | 3 920 | 3 960 | 4 350 |
| Axle load | kg | 3 350 | 3 700 | 3 720 | 4 090 |
1 Recommended towing vehicle, the actual pulling force may significantly change according to the tilling depth, soil conditions, inclination of land, wear of working units and their adjustment.
2 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
PS - semi-mounted foldable machine
