1 | Fertilizer placement zone. Fertilizer is placed about 5 cm next to the seed in depth of 6–12 cm. While the fertilizer is being placed, the seedbed is also partially compacted. |
2 | Crop residue spreading zone. The clearing stars efficiently remove crop residue from the surface for seeding. |
3 | Seedbed formation and seed placement zone. The double disc coulters efficiently create a compacted seedbed (V-groove) and place the seeds precisely at the required depth. Due to the high down-pressure, the seeding coulters can carry up to 70% of the machine weight. The compacted seedbed and V-groove provide excellent contact of the seed with soil and soil water. |
4 | Zone for pressing the seed into the V-groove and its stabilization in the precise place. |
5 | Side seed compression zone. The press roller presses the V-groove with the seed, due to which the seed is pressed into the soil on the side. A loose area for easy crop emergence stays above the seed. |
Impact is designed for precise seeding of wide-row crops (maize, sunflower, and rapeseed) with the option of additional fertilization using granulated fertilizers. Impact has a massive frame. Ensuring precise placement of the fertilizer and the seeds in the required depth, also in heavier soil conditions.
The system of tandem-configured disc fertilization units not only provides precise double-sided placement of fertilizer in the root zone, but also strip-till pre-processing allowing for subsequent precise placement of seeds into the prepared seedbed.
The design of the Impact seed drill allows reaching high working speed according to the soil conditions: from 10 to 15km/h.
Impact is designed for precise seeding of wide-row crops (maize, sunflower, and rapeseed) with the option of additional fertilization using granulated fertilizers. Impact has a massive frame. Ensuring precise placement of the fertilizer and the seeds in the required depth, also in heavier soil conditions.
The system of tandem-configured disc fertilization units not only provides precise double-sided placement of fertilizer in the root zone, but also strip-till pre-processing allowing for subsequent precise placement of seeds into the prepared seedbed.
The design of the Impact seed drill allows reaching high working speed according to the soil conditions: from 10 to 15km/h.
High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.
The drill coulters are equipped with highly advanced system of seeding control. The special sensors monitor each individual seed and precisely evaluate whether or not there are gaps or two seeds in one point. All information about the work of the seed drill is displayed on the ISO-bus terminal in the tractor. Therefore, the operator can immediately check all the functions of the machines and adapt the adjustments or speed to the current soil conditions.
Technical parameters | Units | Impact 6 NS | Impact 8 NS |
---|---|---|---|
Working width | mm | 4 500 | 6 000 |
Transport width | mm | 3 000 | 3 000 |
Transport height | mm | 2 400 | |
Total machine length | mm | 2 350 | 2 350 |
Working depth | mm | 100 | 100 |
Hopper capacity / 1 drill coulter | l | 35 | 35 |
Pressure of drill coulters | kg | 40 | 40 |
Diameter of sowing discs | mm | 390 | 390 |
Working performance | ha/h | 4,5─6 | 6─9 |
Towing vehicle 1 | kW HP |
75 100 |
90 125 |
Working speed | km/h | 6─15 | 6─15 |
Maximum transport speed 3 | km/h | 20 | 20 |
Maximum slope availability | ° | 6 | 6 |
Required pressure 2 | kPa | 8 | 8 |
Number of hydraulic circuits / pressure | bar | 3 / 200 | 3 / 200 |
Number of hydro-couples / type | 6 / ISO 12,5 | 6 / ISO 12,5 | |
Oil flow for machine control | l/min | 30 | 30 |
Electric system requirement | A | 30 | 30 |
Tractor hitch requirement | TBZ cat. 3 | TBZ cat. 3 | |
Machine weight | kg | 2 700 | 3 200 |
1 Recommended towing vehicle, the actual pulling force may significantly change according to the tilling depth, soil conditions, inclination of land, wear of working units and their adjustment.
2 Alternative to hydraulic brake / operating pressure of 130 ± 5 bar.
3 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
Equipment | |
---|---|
Display Dimensions | 5,7" |
ISO-BUS | OK |
Seed Passing Sensor Control | OK |
Hopper Level Reading | OK |
Fan Speed Reading | OK |
Dispenser Speed Reading | OK |
Motor Speed Reading | OK |
Number of Motors (Dispensing) | 3 |
Tramline Flap Control | OK |
Seed Drill Position Display | OK |
Work Lighting Control | OK |
Hopper Lighting Control | OK |
Marker Control | OK |
Pre-emergent Marking Control | OK |
Adding Seed Batch during Work | OK |
Micro Seeding | OK |
Simultaneously Running Screens | 1 |
Camera Input | x |
GSM Modem | x |
Equipment | |
---|---|
Display Dimensions | 8" |
ISO-BUS | OK |
Seed Passing Sensor Control | OK |
Hopper Level Reading | OK |
Fan Speed Reading | OK |
Dispenser Speed Reading | OK |
Motor Speed Reading | OK |
Number of Motors (Dispensing) | 3 |
Tramline Flap Control | OK |
Seed Drill Position Display | OK |
Work Lighting Control | OK |
Hopper Lighting Control | OK |
Marker Control | OK |
Pre-emergent Marking Control | OK |
Adding Seed Batch during Work | OK |
Micro Seeding | OK |
Simultaneously Running Screens | 2 |
Camera Input | OK |
GSM Modem | x |
Equipment | |
---|---|
Display Dimensions | 5,7" |
ISO-BUS | OK |
Seed Passing Sensor Control | OK |
Hopper Level Reading | OK |
Fan Speed Reading | OK |
Dispenser Speed Reading | OK |
Motor Speed Reading | OK |
Number of Motors (Dispensing) | 3 |
Tramline Flap Control | OK |
Seed Drill Position Display | OK |
Work Lighting Control | OK |
Hopper Lighting Control | OK |
Marker Control | OK |
Pre-emergent Marking Control | OK |
Adding Seed Batch during Work | OK |
Micro Seeding | OK |
Simultaneously Running Screens | 1 |
Camera Input | x |
GSM Modem | x |
Equipment | |
---|---|
Display Dimensions | 12,1" |
ISO-BUS | OK |
Seed Passing Sensor Control | OK |
Hopper Level Reading | OK |
Fan Speed Reading | OK |
Dispenser Speed Reading | OK |
Motor Speed Reading | OK |
Number of Motors (Dispensing) | 3 |
Tramline Flap Control | OK |
Seed Drill Position Display | OK |
Work Lighting Control | OK |
Hopper Lighting Control | OK |
Marker Control | OK |
Pre-emergent Marking Control | OK |
Adding Seed Batch during Work | OK |
Micro Seeding | OK |
Simultaneously Running Screens | 5 |
Camera Input | OK |
GSM Modem | for a fee |
x | Not available |
OK | Included |