Modular seed wagon Falcon SW

 Modular seed wagon Falcon SW


Modular seed wagon Falcon SW


Machine configuration without fertiliser

Secí stroj Falcon SWSecí stroj Falcon SWSecí stroj Falcon SW

Wide opportunities of fertiliser application and sowing of more crops in one pass

Variant Fert+

Secí stroj Falcon SWSecí stroj Falcon SWSecí stroj Falcon SW

Secí stroj Falcon SWSecí stroj Falcon SWSecí stroj Falcon SW

Secí stroj Falcon SWSecí stroj Falcon SWSecí stroj Falcon SW

Variant FertS

Secí stroj Falcon SWSecí stroj Falcon SWSecí stroj Falcon SW

Secí stroj Falcon SWSecí stroj Falcon SWSecí stroj Falcon SW

Technology

1 Basic soil levelling zone. Precisely levelled soil surface allows uniform subsequent compaction and cultivation a seedbed.
2 Soil pre-processing zone. The pre-processing of the soil can be made with various working tools, either over the entire sowing depth or in zones up to 25 cm. Soil pre-processing ensures aeration, levelling and optimum cultivation. There is also optimal spreading of  crop residues.
3 Fertilizer storage zone. Granular fertilizers are placed in the root zone of future plants, either directly below each row or between two rows. Depth of fertilizer can be 6–25 cm depending on used section.
4 Seedbed formation and seed placement zone. The double disc seeding coulters effectively create a compacted seedbed (V-groove) and precisely deposit the seed to the required depth. Thanks to the high down-pressure, up to 70% of the weight of the machine can be transferred to the seeding coulters. The compacted seedbed and V-groove ensure excellent seed contact with soil and soil water.
5 The side seed press zone. The copy wheel compresses the V- groove with the seed, causing the seed to squeeze sideways to the soil. There is loosened space above the seed for easy emergence of plants.
6 Seed cover and soil levelling zone. The integrated harrow ensures excellent seed coverage and precise soil surface levelling.

Technics

Modular seed wagon Falcon SW Fert+ & Double-disc sowing section

  1. Tractor trail cultivators
  2. Disk section for additional fertilization
  3. Transport axle
  4. Double-disc sowing section

Modular seed wagon Falcon SW & Double-disc sowing section

  1. Tractor trail cultivators
  2. Transport axle
  3. Double-disc sowing section

Modular seed wagon Falcon SW & Precise sowing of wide-row crops

  1. Possibility to install an optional pre-processing section
  2. Transport axle
  3. Optional rear section via TPH

Falcon SW is a modular carrier consisting of a single-chamber hopper with the capacity of 4 / 6 m3 (or a two-chamber hopper with the capacity of 6 / 8 m3), a metering device, a fan, a simple transport axle, a control unit and a three-point hitch that allows the connection of various mounted devices. Falcon SW can also be connected to a wide seeding section for sowing narrow-row crops, a mounted seed drill for sowing wide-row crops.

Falcon SW can also be equipped with an optional pre-processing section, just like the modular Falcon Seed Drill. The sections can be replaced according to the selected technology.

Falcon SW is a modular carrier consisting of a single-chamber hopper with the capacity of 4 / 6 m3 (or a two-chamber hopper with the capacity of 6 / 8 m3), a metering device, a fan, a simple transport axle, a control unit and a three-point hitch that allows the connection of various mounted devices. Falcon SW can also be connected to a wide seeding section for sowing narrow-row crops, a mounted seed drill for sowing wide-row crops.

Falcon SW can also be equipped with an optional pre-processing section, just like the modular Falcon Seed Drill. The sections can be replaced according to the selected technology.

Mounted Equipment

Wide seeding section for sowing narrow-row crops
The seeding section is characterised by its simplicity and a wide working width. In connection with Falcon SW, it provides high working capacity for sowing common narrow-row crops (cereals, rape, legumes etc.). At the same time, it allows for independent sowing of two crops. The spacing of the coulters is 12.5 cm with an option to switch to 25 cm, or 15 cm with an option to switch to 30 cm, or 16.7 cm with an option to switch to 33.4 cm.
Mounted sowing machine for sowing wide-row crops
The seeding units for sowing wide-row crops (such as corn and sunflower) together with the application of fertilizer from the Falcon SW modular carrier provide sowing as well as fertilizer application in a single operation. The application of the fertilizer is provided by two fertilizer applicators on both sides of the crop. Versions: 6 / 8 rows

Easy Operation

The minimum number of adjustment and lubrication points makes the operation, control as well as subsequent maintenance a very simple task that anyone can manage.

  • Easy setting of the sowing depth, coulter pressure and seeding amount.
  • Simple electronic system with intuitive control.
  • Minimum adjustment points.
  • Minimum lubrication points.
Excellent terrain tracing
The flexible frame design perfectly absorbs impacts and traces the terrain.
Three-point hitch
An easy aggregation of the rear section via TPH (the sections are easily exchangeable).
Large hopper
Single-chamber hopper
Detail of the front section side fixtures
Possibility to aggregate a front section:
Aggregation with tractor
Aggregation in the bottom arms of TPH.
Two-hose air brakes
Pressurized hopper
Farmet dispenser
A modern roller dispenser with interchangeable rollers.

Auger or roller metering units of fertiliser

Auger metering unit Fert+
Modern auger metering unit. Fertiliser guiding to the fertilisation units.
Auger metering unit Fert+
Roller metering unit FertS
Modern roller metering unit with interchangeable rollers. Fertiliser guiding directly to the seed.

Parameters

Technical Parameters Units Falcon SW
Transport width cm 300
Transport height cm 290─400
Total machine length cm 750
Hopper capacity without fertilization l 4 000 / 6 000
Hopper capacity with fertilization
(ratio 40:60)
l 6 000 / 8000
Hopper filling height cm 265
Dimensions of the filling opening without fertilization / with fertilization cm 200 x 52 /
120 x 52
Working speed km/h 10─20
Maximum transport speed 2 km/h 25
Maximum slope availability ° 6
Dimension of tyre - transport   700/50-22,5
Type of brake / distribution 1, 2   air / double-hose
Required pressure 1 kPa 8,5
Number of hydraulic circuits / pressure bar 4 / 200
Number of hydraulic couplers / type   6 / ISO 12,5
Non-pressure return line (max. 5 bar)   1 / ISO 20
Oil flow of hydraulic fan l/min 30─40
Oil flow for machine control l/min 50─60
Electric system requirement   12 V DC / 40 A
Tractor hitch requirement   TPH cat. 3
Machine weight kg 6 500─7 140


1 Hydraulic brake alternative / operating pressure 130 ± 5 bar.
2 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

Sowing section: narrow-row sowing (grain, rape)

Technical parameters Units      
Working width of section m 6 8 9
Number of drill coulters
Spacing 12,5 / 25 cm
pc 48 64 72
Number of drill coulters
Spacing 15 / 30 cm
pc 40 - 60
Number of drill coulters
Spacing 15,4 / 30,8 cm
pc - 52 -
Number of drill coulters
Spacing 16,7 / 33,4 cm
pc 36 48 54
Number of coulters for additional fertilisation
Spacing 25 cm
pc 24 32 36
Number of coulters for additional fertilisation
Spacing 30 / 30,8 cm
pc 20 27 30
Number of coulters for additional fertilisation
Spacing 33,4 cm
pc 18 24 27
Pressure of drill coulters /
coulters for additional fertilisation
kg 50─120 / to 200 50─120 / to 200 50─120 / to 200
Diameter of sowing disc of two-disc coulter / pressure wheel cm 35,5 / 33 35,5 / 33 35,5 / 33

Sowing section: wide working width sowing (corn, sunflower)

Technical parameters Units    
Number of sowing units pc 6 8
Working width cm 420 / 450 560 / 600
Spacing of sowing units cm 70 / 75 70 / 75
Hopper volume - 1 sowing coulter l 35 35
Pressure of drill coulters kg 350 350
Diameter of sowing discs cm 39 39

Modulability

Wide Selection of Working Sections

You can choose from a wide offer of versions in each working section according to the selected sowing or cultivating technology with fertilizer application. You can choose the size of the bin, pre-processing section, sowing section as well as cultivating section.

 Modular seed wagon Falcon SW

Hopper

Large hopper
Hopper with capacity of 4 / 6 m3, a two-chamber hopper with capacity of 6 / 8 m3 can be supplied upon request, seeds and fertilizer distribution 60:40.

Rear Section

Connection via three-point hitch, cat. 3.

Double-disc sowing section (spacing 12,5 / 15 / 16,7 cm), up to the width of 9 meters
Spacing 12,5 / 15 / 16,7 cm – suitable for sowing cereals, legumes

Double-disc sowing section (spacing 25 / 30 / 33,4 cm), up to the width of 9 meters
Spacing 25 / 30 / 33,4 cm – in combination with the pre-processing three-row chisel section STRIP TILL, it is suitable for strip soil tillage, sowing with fertilization in a single line up to the depth of 25 cm. Ideal for sowing winter rape.

Precise sowing of wide-row crops, working width 6 / 8 rows at spacing of 70 / 75 cm
For sowing wide-row crops (corn, sunflower). With possibility of fertilization on both sides of the row.

Pre-processing Section

The Falcon SW Modular Seed Drill allows for work without the front pre-processing section. A pre-processing section can be installed upon request.

Pre-processing disc section for full-area soil processing
A universal working section, soil processing up to the seedbed depth, max. 10 cm. Possibility to combine with the front Flexi-board paddle leveller.

Flexi-board – front paddle leveller
For uniform spreading of clods and crop residue along the entire machine width.

Pre-processing 4-row chisel section for full-area soil processing
Mainly suitable for wet conditions – sowing spring crops.

Pre-processing 2- row chisel section (spacing 25 / 30 / 33,4 cm), for STRIP-TILL technology + disk roller, diameter 58 cm
Strip-till loosening with the option of additional fertilization using granulated fertilizers up to the depth of 25 cm.

Recommenced Combinations of Falcon SW Modular Seed Drill

  Main Crops Front Pre-processing Section Rear Sowing or Processing Section Additional Fertilization
 Grain cereals
legumes
no pre-processing section
disc section
disc section + Flexi-board
Flexi-board
4-row chisel section
double-disc sowing section
for sowing narrow-row crops
(spacing 12.5 / 15 / 16.7 cm)
YES
 Corn  corn
sunflower
no pre-processing section
disc section
disc section + Flexi-board
Flexi-board
4-row chisel section

precise sowing of wide-row crops
(spacing 70 / 75 cm)

YES
 Colza winter rape

STRIP chisel section
(spacing 25 / 30 / 33,4 cm)

double-disc sowing section with sowing
in line of soil processing
(spacing 25 / 30 / 33.4 cm)
YES

Optional

Photo gallery

Video

Files

Accessories

Display Units

BASIC-Terminal
Equipment  
Display Dimensions 5,7" 
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Tramline Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 1
Camera Input x
GSM Modem x

Müller Elektronik: ISOBUS DRILL-Controller

TOUCH800®
Equipment  
Display Dimensions 8"
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Tramline Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 2
Camera Input OK
GSM Modem x

Müller Elektronik: ISOBUS DRILL-Controller

SMART570®
Equipment  
Display Dimensions 5,7" 
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Tramline Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 1
Camera Input x
GSM Modem x

Müller Elektronik: ISOBUS DRILL-Controller

Topcon XD+
Equipment  
Display Dimensions 12,1"
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Tramline Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 5
Camera Input OK
GSM Modem for a fee

Müller Elektronik: ISOBUS DRILL-Controller

x Not available
OK Included

Optional equipment

A cart for easy exchange of front section