| 1 | Ground levelling zone. It can be used well in seedbed preparation. |
| 2 | Loosening zone. Loosening depth 4 - 15 cm. Optimized geometry chisels in four rows with small final spacing ensure very fine full-area loosening and intensive soil mixing with plant residues. |
| 3 | Wave-levelling zone. Levelling discs also increase the effect of incorporating plant residues. |
| 4 | Clod crumbling and soil reconsolidation zone. Optimum soil reconsolidation ensures good water infiltration and soil moisture rise. The rollers can be also easily removed and work with no rollers. |
The half mounted 5-row modular cultivator Fantom PRO with low traction resistance and variable depth of soil processing is suitable for spring, summer and autumn work and thanks to its modularity it can start the spring work very soon since it can handle even more wet soil.
The plough beams with spacing of 190 mm are located in 5 rows. Due to its optimized distribution in combination with a high framework clearance of 655 mm an excellent passability of plant residues and resistance to clogging are achieved. The tapping system of V-ploughs and chisels enables their easy and fast replacement.
Fantom PRO is equipped with an integrated axle and tracing wheels. Due to this, it is possible to operate the machine without rear accessories (e.g. rollers or harrows). The quick-clamping system is used for attachment of the rear accessories. This way the disconnection or connection is a question of several minutes.
The half mounted 5-row modular cultivator Fantom PRO with low traction resistance and variable depth of soil processing is suitable for spring, summer and autumn work and thanks to its modularity it can start the spring work very soon since it can handle even more wet soil.
The plough beams with spacing of 190 mm are located in 5 rows. Due to its optimized distribution in combination with a high framework clearance of 655 mm an excellent passability of plant residues and resistance to clogging are achieved. The tapping system of V-ploughs and chisels enables their easy and fast replacement.
Fantom PRO is equipped with an integrated axle and tracing wheels. Due to this, it is possible to operate the machine without rear accessories (e.g. rollers or harrows). The quick-clamping system is used for attachment of the rear accessories. This way the disconnection or connection is a question of several minutes.
The rear accessories is connected through the parallelogram ensuring perfect copying of the terrain and consequently the modular system enables replacement or full disconnection of the rear rollers and other accessories. Due to the integrated axle, the machine can operate without the rear accessories when the ploughshares or chisels located behind the wheels perform smoothing and cultivation of the formed traces. The integrated axle also ensures good manoeuvrability and quick turning during operation and during transport as well. The high frame clearance of 655 mm provides optimum passability and adaptability to field conditions. Quality loosening and cultivation of the soil with subsequent incorporation of plant residues with relatively low traction resistance is ensured by the replaceable ploughshares or chisels. Possible replacement of ploughshares is quick and easy thanks to the quick-clamping system (wedge or pin).
The rear accessories is connected through the parallelogram ensuring perfect copying of the terrain and consequently the modular system enables replacement or full disconnection of the rear rollers and other accessories. Due to the integrated axle, the machine can operate without the rear accessories when the ploughshares or chisels located behind the wheels perform smoothing and cultivation of the formed traces. The integrated axle also ensures good manoeuvrability and quick turning during operation and during transport as well. The high frame clearance of 655 mm provides optimum passability and adaptability to field conditions. Quality loosening and cultivation of the soil with subsequent incorporation of plant residues with relatively low traction resistance is ensured by the replaceable ploughshares or chisels. Possible replacement of ploughshares is quick and easy thanks to the quick-clamping system (wedge or pin).
Tips of ploughshares are standardly fitted with plates of cemented carbides ensuring prolonged service life and optimum geometry of ploughshare throughout the lifetime of the machine. There are the levelling disks located behind the ploughshares. The disks ensure levelling of the soil surface. To obtain optimum surface structure and good recompaction, there is an option of an appropriate rear roller. The thrust of the rollers can be selected – either with the weight of the connecting device or with the hydraulic force. When the working depth is changed, the thrust is automatically adapted so that the soil is compacted with the same force. There are several types of rear rollers. The roller provides recompaction of the soil, crumbling of clods and levelling of the area surface. Thanks to the quick-clamping system it is possible to easily replace the rollers, e.g. for the bar harrows, or operate absolutely without the rear accessories. Readjustment of the machine can be performed while the vehicle is in motion through the hydraulic circuits.
Tips of ploughshares are standardly fitted with plates of cemented carbides ensuring prolonged service life and optimum geometry of ploughshare throughout the lifetime of the machine. There are the levelling disks located behind the ploughshares. The disks ensure levelling of the soil surface. To obtain optimum surface structure and good recompaction, there is an option of an appropriate rear roller. The thrust of the rollers can be selected – either with the weight of the connecting device or with the hydraulic force. When the working depth is changed, the thrust is automatically adapted so that the soil is compacted with the same force. There are several types of rear rollers. The roller provides recompaction of the soil, crumbling of clods and levelling of the area surface. Thanks to the quick-clamping system it is possible to easily replace the rollers, e.g. for the bar harrows, or operate absolutely without the rear accessories. Readjustment of the machine can be performed while the vehicle is in motion through the hydraulic circuits.
High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.
Due to minimum of adjusting points the operation and subsequent maintenance are very easy steps that anybody can perform.
The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.
| Technical parameters | Units | Fantom 650 PRO |
Fantom 800 PRO |
Fantom 850 PRO |
Fantom 1050 PRO |
Fantom 1250 PRO |
|---|---|---|---|---|---|---|
| Working width | mm | 6 550 | 8 050 | 8 450 | 10 350 | 12 250 |
| Transport width | mm | 3 000 | 3 000 | 3 000 | 3 000 | 3 000 |
| Transport height | mm | 3 550 | 4 000 | 4 275 | 3 700 | 4 000 |
| Total machine length | mm | 9 900 | 9 900 | 9 900 | 10 400 | 10 400 |
| Working depth | mm | 40–150 | 40–150 | 40–150 | 40–150 | 40–150 |
| Number of ploughshares | pcs | 35 | 43 | 45 | 57 | 67 |
| Ploughshare spacing | mm | 190 | 190 | 190 | 190 | 190 |
| Number of ploughshare rows | pcs | 5 | 5 | 5 | 5 | 5 |
| Row spacing | mm | 790 | 790 | 790 | 790 | 790 |
| Release force of ploughshares | kg | 310 | 310 | 310 | 310 | 310 |
| Number of supporting wheels | pcs | 4 | 6 | 6 | 8 | 8 |
| Number of transport wheels | pcs | 2 | 2 | 2 | 2 | 2 |
| Frame clearance | mm | 655 | 655 | 655 | 655 | 655 |
| Working performance | ha/h | 5,2–7,8 | 6,4–9,6 | 6,8–10,2 | 8,4–12,6 | 10,0–15,0 |
| Towing vehicle 1 | kW HP |
200–300 270–405 |
230–350 310–475 |
245–370 330–495 |
295–400 400–550 |
400–440 550–675 |
| Working speed | km/h | 8–12 | 8–12 | 8–12 | 8–12 | 8–12 |
| Maximum transport speed 4 | km/h | 30 | 30 | 30 | 30 | 30 |
| Maximum slope availability | ° | 6 | 6 | 6 | 6 | 6 |
| Number of hydraulic circuits / pressure | bar | 5–6 / 200 | 5–6 / 200 | 5–6 / 200 | 5–6 / 200 | 5–6 / 200 |
| Number of quick-coupling devices / type | 12 / ISO 12,5 | 12 / ISO 12,5 | 12 / ISO 12,5 | 12 / ISO 12,5 | 12 / ISO 12,5 | |
| Tractor hitch requirement | TPH cat. 3; pin Ø 50, 70 mm; ball K80 | pin Ø 50, 70 mm; ball K80 | ||||
| Machine weight 2 | kg | 8 300 | 9 300 | 9 500 | 12 700 | 13 800 |
1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Depends on the type of the roller used.
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
PRO - the transport axle is placed in front of the rear roller
| Diameter | 525 mm |
| Weight | 170 kg/m |
| Diameter | 500/500 mm |
| Weight | 185 kg/m |
| Diameter | 500 mm |
| Weight | 90 kg/m |
| Diameter | 570/570 mm |
| Weight | 175 kg/m |
| Diameter | 520/520 mm |
| Weight | 165 kg/m |
| Diameter | 510/510 mm |
| Weight | 180 kg/m |
Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.
| Roller | Double ring DRR |
Double DFR |
Double spiked DSR |
Tube TR |
|---|---|---|---|---|
| Crumbling | ●●●○ | ●●●○ | ●●○○ | ●●○○ |
| Stamping | ●●●● | ●●●● | ●●●○ | ●●●○ |
| Depth guiding | ●●●● | ●●●● | ●●●● | ●●●○ |
| Resistance against clogging | ●●●● | ●●●● | ●●●● | ●○○○ |
| Suitability for stony soils | ●●●○ | ●●●○ | ●●●○ | ●●●○ |
| Suitability for wet soils | ●●●● | ●●●● | ●●●● | ●○○○ |
| Heavy soils | ●●●● | ●●●● | ●●●● | ●●○○ |
| Medium soils | ●●●● | ●●●● | ●●●● | ●●●○ |
| Light soils | ●●●● | ●●●● | ●●●○ | ●●●● |
| Roller | Disk SDR |
Double V-ring DVR |
|---|---|---|
| Crumbling | ●●●○ | ●●●○ |
| Stamping | ●●●● | ●●●● |
| Depth guiding | ●●●● | ●●●● |
| Resistance against clogging | ●●●○ | ●●●● |
| Suitability for stony soils | ●●●○ | ●●●○ |
| Suitability for wet soils | ●●●● | ●●●● |
| Heavy soils | ●●●● | ●●●● |
| Medium soils | ●●●● | ●●●● |
| Light soils | ●●●○ | ●●●● |
| Weight | 62,5 kg/m |
| Diameter | 300 mm |
| Weight | 165 kg/m |
| Harrow | Flexi-board + harrow |
Three-row harrow + Bar roller |
|---|---|---|
| Crumbling | ●●○○ | ●●●● |
| Stamping | ●○○○ | ●○○○ |
| Resistance against clogging | ●●●● | ●●○○ |
| Suitability for stony soils | ●●○○ | ●●○○ |
| Heavy soils | ●●○○ | ●●○○ |
| Medium soils | ●●●● | ●●●○ |
| Light soils | ●●●● | ●●●● |
| Share width | 50 mm |
| Share body hardness | up to 55 HRC |
| Widia plate hardness | up to 92 HRA |
| Hardness of hard facing | up to 60 HRC |
| Share service life | + 400-600 % |
| Share width | 50 mm |
| Share body hardness | up to 55 HRC |
| Widia plate hardness | up to 92 HRA |
| Share width | 280 mm |
| Share body width | 43 mm |
| Share thickness | 6 mm |
| Body hardness | up to 55 HRC |
| Carbide plate hardness | up to 92 HRA |
For all-area undercutting
| Share width | 50 mm |
| Share body hardness | up to 55 HRC |
| Widia plate hardness | up to 92 HRA |
| Share service life | + 400-600 % |
| Share width | 230 mm |
| Share thickness | 8 mm |
| Body hardness | up to 55 HRC |
Divides 1 tractor circuit into 3 circuits.
